Insulation Services Before & After Photos

The attic of a Manchester Township home had insufficient insulation, relying on exposed fiberglass that provided little protection. Our inspection uncovered problems with air sealing and ductwork leaks, which commonly lead to high utility bills and homeowner discomfort. To tackle these issues, our team used ZypFoam for air sealing, mastic tape for duct sealing, built retaining walls, and applied TruSoft cellulose insulation, resulting in an impressive R-60 insulation value. Consequently, the homeowner now experiences a more energy-efficient and comfortable home.

In Manchester Township, NJ, a homeowner faced discomfort in certain rooms and high energy bills due to issues like leaky ducts, inadequate insulation, and an unsealed attic. Our team took a comprehensive approach to resolve these issues. By repairing the leaky ducts, air sealing the attic, and installing R-60 TruSoft cellulose insulation, we made the attic more comfortable and energy-efficient.

In Manchester, NJ, this homeowner was dealing with high energy bills, drafty rooms, cold floors in the winter, and stuffy, uncomfortable rooms in the summer. After properly air sealing and insulating the attic, we turned our attention to the crawlspace to address the source of outside air and moisture entering the home. Once we stopped conditioned air from escaping into the attic, it was critical to eliminate the leaks pulling in air from below. We sealed and blocked all crawlspace vents with rigid foam boards, spray foamed the rim joists and sill plates to close off major air leaks, and installed rigid foam boards along the porous cinder block foundation walls. To finish, we added a vapor barrier to control ground moisture. This combination of air sealing, insulation, and moisture control helps create a more comfortable home while reducing energy costs.

In Freehold Township, NJ, a homeowner faced discomfort due to conditioned air leaking through an exposed interior attic wall, causing temperature extremes in the adjoining room. We resolved this issue by installing SilverGlo insulation boards and sealed with orange ZypFoam in key areas. This included applying and sealing SilverGlo on the attic side of interior walls. Completing the transformation, we air-sealed and insulated the attic with TruSoft cellulose, achieving an R-value of R-60. The result: a well-insulated, comfortable, and energy-efficient home for the homeowner.

This homeowner in Freehold Township, NJ had a large poorly insulated cathedral ceiling with two skylights. We can see dirty exposed fiberglass insulation doing next to nothing to insulate the adjoining walls. Also the cathedral ceilings have exposed fiberglass insulation leaving outside air to circulate or leak through the rafters and into the attic creating an uncomfortable room.

To solve this issue we installed our SilverGlo insulation panels onto the adjoining walls of the cathedral ceiling and skylights. Using orange ZypFoam sealant we air sealed the whole attic floor and seams of the SilverGlo insulation panels. Next using TruSoft cellulose insulation our team dense-packed the adjoining walls and the slope of the roof to help insulate the cathedral ceiling. Finally we blew-in TruSoft insulation onto the attic floor to complete the insulation. This house is now more comfortable and energy efficient.